The OneStock comes with

• OneStock telescoping frame
• Length and Height adjustable buttstock
• Two interchangeable controller grips (left and right) for your selected VR system
• Dual-QD multifunctional soft-touch sling
• Controller friction adjustment tool
• Spare wear parts for the friction joints
• Product box

All features of the Wield VR OneStock are designed to be as intuitive and easy to use as possible.

The frame can be adjusted simply by unlatching the locking lever with one finger and then pulling the frame shorter or longer.

After doing the adjustment, you can leave the locking lever open to play pump-action, or relock it into the new position by pushing the locking lever in.

All features of the Wield VR OneStock are designed to be as intuitive and easy to use as possible.

The controller mounts can simply be adjusted by with one hand grabbing the VR controller and putting it in place into the controller grip, and with the other hand gripping the OneStock frame.

Then you can just simply twist the controller into the desired position, be it vertical or horizontal. You can also fine-tune the controller angle and the angle of your wrist.

We call our controller adjustment friction mounts the BiHold system due to this 2-handed grabbing action.

In order to lock the BiHold friction mount into a desired position in for example eSports use cases, you can simply take a hex key and tighten the friction joints to the point where they no longer rotate when twisting with 2 hands.

All features of the Wield VR OneStock are designed to be as intuitive and easy to use as possible.

The buttstock length adjusts by simply pushing a button and pulling or pushing the stock to the desired length one step at a time.

The buttstock height similarly adjusts by push-button action, but this one requires button presses on both sides of the rail at the same time, and then you can freely lift or lower the cheek rest into the desired position and release the push buttons until the buttstock clicks into place.

The entire buttstock assembly can also be slid off the rail and re-inserted in an inverted position in some use cases.

All features of the Wield VR OneStock are designed to be as intuitive and easy to use as possible.

The premium tactical carrying sling provided with every OneStock can be used and adjusted in multiple ways.

Firstly, the sling attaches to the OneStock by pushing the Quick Disconnect swivel button in, and pushing the QD swivel into the slot in the OneStock.

The sling can be configured either 1-point or 2-point configurations by attaching the sling's second QD swivel onto itself or to the OneStock frame.

You can adjust the sling to be in left-handed or right-handed 1-point configuration by altering which side of the sling buckle the QD swivel is attached to.

You can adjust the length of the sling by pulling the loop on the sling up or down.

The OneStock will come with controller grips for your selected VR system and no additional controller grips are required. If you would like a second pair as a backup or another pair for a different VR system then the Additional Controller Mounts are for you! Please be sure to specify the VR system you would like the controller mounts to be in on the product page!

Please refer to our instruction videos here:instructional videos

Please refer to our instruction videos here: instructional videos

Please refer to our instruction video here: instructional videos